Setting Up The Internet On A Samsung Tv

Setting Up The Internet On A Samsung Tv

Wired Connection (LAN)

1. Connect the LAN port on the back of the TV to an external modem using an Ethernet network cable.

2. Connect the LAN port on the back of the TV to the IP sharing device connected to the external modem.

3. Depending on the settings, the TV can be connected directly to a power outlet using a network cable.

If your home network is in dynamic mode, you need to use some kind of xDSL modem or router. If the connection device supports DHCP, the IP address, gateway, subnet mask, and DNS servers will be set automatically.

If your network uses a static IP address, you must enter it and other connection parameters manually. In this case, you can also use xDSL modems with DHCP support.

Auto tuning (with DHCP support)

  1. Go to Network Settings; → cable;

2. The network test screen appears. this completes the network setup.

The setting is supported on a network with access speeds below 10 Mbps. If you cannot find the values ​​for the network connection settings or if you want to perform manual settings, select Manual ;.

Manual setting (when using a static IP address)

  1. Go to Network Settings; → cable;
  2. Select IP Setting; on the network check screen.
  3. Set IP Mode; value Manual;

4. Use the arrows to scroll through the connection parameters (IP address ;, Subnet mask ;, Gateway; and DNS server;) and enter them manually. 5. When finished, click OK. The network check screen appears. the network setup is over.

Wireless connection (WiFi)

To connect to a network wirelessly, you will need a wireless modem or router, as well as Samsung LED TVs. Samsung WiFi adapter (WIS09ABGN, WIS09ABGN2, WIS10ABGN), which you need to connect to the USB connector on the back of the TV. The adapter supports IEEE 802.11a / b / g / n communication protocols. Samsung recommends using the IEEE 802.11n protocol.

Read more:  Galaxy S8 Is Quickly Discharged Do Not Rush To Change The Battery!

Samsung PDP plasma TVs have a WiFi adapter and a separate external USB adapter is not required.

  • If High-throughput (Greenfield) 802.11n is selected in its pure form and WEP, TKIP or TKIP AES (WPS2Mixed) is selected as the encryption type for the access point, Samsung TVs will not support the connection in accordance with the new specifications of the WiFi certificate.
  • If the wireless router supports WPS (WiFi Protected Setup), then you can connect to the network by pressing a single button (PBC) or using a PIN code. WPS will automatically configure the SSID and WPA key for each mode.

When connecting the Samsung Wireless LAN Adapter, turn off the TV, connect the adapter, then turn on the TV again. The image may be distorted on some channels if the TV is connected to a Samsung Wireless LAN Adapter. In such cases, you should establish a connection using one of the following methods or connect the Samsung Wireless LAN Adapter using a USB cable in a place where radio interference is excluded. Method 1: Connect using a rectangular USB adapter.

  1. Connect the rectangular USB adapter to the Samsung Wireless LAN Adapter.
  2. Plug the other end of the rectangular adapter into the USB port.

Method 2: Connection via extension cable.

  1. Connect the extension cable to the USB port.
  2. Connect the extension cable to the Samsung Wireless LAN Adapter.
  3. Attach the Samsung Wireless LAN Adapter to the back of the TV at the top with a double-sided adhesive tape. The Samsung Wireless LAN Adapter must be installed at a distance from the TV connectors to avoid interference between the adapter and the tuner.
Setting Up The Internet On A Samsung Tv

Read more:  How To Set Up Internet On Iphone

Most wireless networks are protected by an additional security system, which requires the connected devices to provide an encrypted security code called an access code or security key. It. a passphrase, usually a word or sequence of letters and numbers of a certain length, that the user must enter when setting up the wireless network security.

When choosing this method of setting up a wireless network connection and if there is a wireless security key during the setup procedure, the user must enter a passphrase. You can wirelessly connect your Samsung TV to a network in several ways:

  • Auto (using the automatic network search function)
    1. Go to the Network Settings screen; → Wireless;
    2. Network function; Searches for available wireless networks. When the search is completed, a list of available networks is displayed.
    3. In the list of networks, use the arrows to select a network, and then press the ENTER button.
    4. The network check screen appears. the network setup is over.

    If the wireless mode is set to hide (invisible), select the Add network option; and enter the appropriate values ​​for Network Name (SSID) and Security Key to establish a connection. If the Protection; pop-up window appears, specify the security key (Protection; or PIN;) and select Next ;. When entering the security key, use the arrow buttons on the remote control to select numbers or letters.

    • Manual
      1. Go to the Network Settings screen; → Wireless;
      2. Network function; Searches for available wireless networks. When the search is completed, a list of available networks is displayed.
      3. In the list of networks, use the arrows to select a network, and then press ENTER ;. The network check screen appears.
      4. Select IP Settings; on the network check screen.
      5. Set IP Mode; value Manual;
      6. Use the arrows and numeric buttons on the control panel to enter values ​​for the parameters IP address ;, Subnet mask ;, Gateway; and DNS server;. After setting, click OK;
      7. The network check screen appears. this completes the network setup.
      8. WPS (PBC)
        1. Go to the Network Settings screen; → WPS (PBC);
        2. Press the WPS (PBC) button; on the router and hold it for 2 minutes. The TV will automatically receive all the necessary parameter values ​​that are required to connect to the network.
        3. The network check screen appears. this completes the network setup.
        4. Ad hoc
        5. One foot connection (Your WiFi router must support this feature)
          1. Go to the Network Settings screen; → One Foot Connection;
          2. Install the WiFi router parallel to Samsung WiFi adapter at a distance of no more than 25 cm.
          3. Wait until the connection is established automatically.
          4. The network check screen appears. the network setup is over.
          Read more:  Transfer Contacts From Samsung To A Computer

          If the settings of the wireless router have been changed or a new access point has been installed, repeat the above connection procedure using the One Foot Connection function.

          • Plug & Access (Your WiFi router must support this feature)
            1. Insert the USB storage device into the Samsung wireless router and check the status of the access point indicator (blinks → on).
            2. Remove the USB device and insert it into the Samsung TV.
            3. Wait until the connection is established automatically.
            4. The network check screen appears. this completes the network setup.

            If the settings of the wireless router have been changed or a new wireless router has been installed, repeat the above connection procedure using the Plug function & Access