Hang-up is a problem that any computer equipment faces. At some point, one of the programs starts to behave incorrectly or conflicts with another program and as a result, the entire device is inoperative. It is this situation that is called hovering.
iPhone is also prone to this problem and may freeze from time to time. Typically, when the iPhone freezes, it refuses to shut down or reboot, which confuses the user. Older models, such as the iPhone 4, 4s, 5, 5s, and 6, hang most often. But, sometimes even iPhone 6s and 7 users experience freezes.
If you are in this situation, then this material should help you, here you will learn what to do if your iPhone freezes.
iPhone freezes and does not turn off or restart
Usually, in the event of an iPhone freezing, users try to turn it off or restart it using the standard procedure, namely by long pressing the On / Lock button. Unfortunately, in most cases, when the iPhone hangs, this shutdown method does not work. The iPhone continues to work and execute the hung application, regardless of how long the user presses the power button.
But, iPhone has an alternative shutdown method that works around the iOS operating system. Thanks to this, this shutdown method works even on tightly hanging devices. The method consists in simultaneously pressing the Home button and the On / Lock button.
Home and Power Buttons
The Home and Power On buttons must be pressed at the same time and held until the frozen iPhone turns off. After turning off, you need to wait a few seconds and make a short single press on the power button. After that, the iPhone will turn on and start working normally.
It should be noted that the key combination "Home + Turn on" is also responsible for obtaining a screenshot. But, to get a screenshot of these keys, you need to press literally for 1 second, if you hold the keys for longer, the anti-freeze protection will work and the iPhone will reboot.
If you have an iPhone X or newer, then you need to use the new reboot method.
iPhone freezes when turned on
Pressing the “Home + Power On” buttons simultaneously allows you to turn the device off and on in any situation. However, this procedure does not guarantee that in the process of turning on the iPhone does not hang again.
If your iPhone freezes before the device is fully loaded, then you can use the recovery mode called “Recovery Mode”. With it, you can restore the original state of the iPhone and bring it back to life. But, keep in mind that this procedure is equivalent to resetting to the factory settings and leads to the deletion of all user data.
In order to enter Recovery Mode on an iPhone and perform recovery, you need to do the following:
- Turn off the iPhone and wait a couple of minutes for all the programs to finish their work. If the iPhone does not turn off in the standard way, then you can resort to the combination “Home + Turn On” described above.
- Next, you need to click on the "Home" button and without releasing it connect the iPhone to the computer via the Lightning cable.
- After connecting, continue to hold the Home button until the iTunes logo and cable image appear on the iPhone.
- Now you need to release the Home button and launch iTunes on the computer.
- In iTunes, you need to go to the iPhone settings and click on the "Restore iPhone" button.
Restore iPhone Button
Thus, you can solve the problem with iPhone hangs during power-up, but, as already mentioned, for this you will need to sacrifice all user files. You can read more about Recovery Mode in our article on resetting iPad to factory settings.
Also, Apple devices have the so-called DFU mode or Device Firmware Update. If the recovery mode does not help, then you can try to enter the iPhone in DFU mode and try the recovery again.